Germany HAWE piston pump
The fluid technology products of the design, manufacturing and testing in compliance with EU standards and effective general provisions of the situation, it is in good condition at the factory security technology.
In order to obtain the state and ensure the safe operation, users must comply with tips and warnings contained in this document.
With the fluid technology products can only be observed by the master and the general applicable rules and all applicable regulations and standards, qualified professional personnel to install, and integrate it into the hydraulic system.
In addition, when necessary, should comply with the equipment and use location on the application or use of certain special matters.
Products only as a hydraulic pump in the system in use.
The product must be run on technical parameters within the prescribed scope. The technical parameters of different product variants included in this document
V60N for open loop in operation. They can drive the truck directly in the auxiliary (PTO) by IS03019-2 with IS07653, the flange
By SAE-C, SAE-B2, or SAE-B4 flange installation. The other connection can be achieved through the cardan shaft and fit coupling sleeve.
Can rotate in the direction of pump V60N in all transform.
To install the pump and its installation and removal only by trained personnel. In all the work, must pay attention to clean. May the dirt pump function and the
Inclined axial piston pump K60N-047RDN
Inclined axial piston pump K60N-047RDN-A45/38
K60N-064RDN-A45/38
KR2-224V
KS2-224V
Explosion proof valve LB2F0.8-40
LB4C-100
Plate balance valve LHK40F-11CPV-350
Balance valve LHT50SAE-15-4B6-200/230
LHK22G-21-180/180
Balance valve LHK33G-21-... /...
Balance valve LHK33G-11-...
LHK33G-25-... -...
The hydraulic pump station LP125-25/B4-VB11LP-H-2
The hydraulic pump station LP125-16/B4-A1/200
V60N- axial piston pump
Variable axial piston pump with its solid structure for direct plate connection in the commercial vehicle auxiliary driving flange or through the SAE standard design. The basic parameters of open widely used for 130cm3/r and 450bar peak pressure. The self absorption by high speed and low sound pressure level support. Can provide auxiliary pump shaft through the combination of variable axial piston pump or other forms. A variety of control modules to provide users with a variety of possibilities of using variant. In the LHT and the LHDV balance valve of variable axial piston pump used in combination with PSV type proportional directional valve and may be necessary, shows a special advantage in mutual correction.
Our products are widely used in chemical, petrochemical, electric power, metallurgy, environmental protection, universities and research institutions, to meet different user needs different products.
The company to ensure good service for the purpose, to establish a broad partnership with domestic enterprises.
Contact: Miss Song